JAI Apex Series, User Manual

Page: 59 / 113

AP-1600T-USB | AP-3200T-USB | User Manual (Ver. 2.0) Main Functions
- 59 -
Sequencer Function
Related Setting Items: Sequencer Control
The Sequencer function lets you define up to 128 index combinations of exposure time, gain, ROI, and
other settings which can be stepped through each time a trigger is received. This is particularly useful
for quickly capturing multiple exposures of objects under inspection to adjust for areas or components
with significantly different levels of reflectance. You can specify the next index in the stepping
sequence and the order in which indexes are executed. Multiple indexes can also be executed
repeatedly.
Two operation modes ( Trigger Sequencer mode and Command Sequencer Mode ) are available for
the Sequencer function.
Notes:
l
The Sequencer function cannot be used together with Overlap Multi ROI Mode and ( Sensor Multi
ROI Function (AP-1600T-USB only).
l
When SequencerMode is ON , the Width, Height, OffsetX, and OffsetY settings
( ImageFormatControl ) cannot be changed. When changing SequencerMode from OFF to ON, the
Width, Height, OffsetX, and OffsetY settings are returned to the default settings (= full ROI).
l
When changing SequencerMode from OFF to ON , the ExposureModeOption setting
( AcquisitionControl ) will be forced to Off .
l
When SequencerMode is On , the settings of each item associated with SequencerSetSelector
cannot be changed.
About Indexes (imaging conditions)
Up to 128 indexes can be configured. The following settings can be configured for each index.
However, SequencerFrameNumber and SequencerSetNext can only be configured in
TriggerSequencer mode.
Note: For more information on each setting item, see Sequencer Control .