JAI AB-1600GE, User Manual

Page: 8 / 71

AM-1600GE / AB-1600GE
5
3. Main Features
•
C3 Advanced series progressive scan camera
•
GigE vision, GenICam compliant
•
Monochrome and Bayer mosaic color versions
•
KAI-16000 IT CCD, 43.3mm diagonal (35mm film size)
•
4872 (h) x 3248 (v) active pixels
•
7.4 µm square pixels
•
12- or 10- or 8-bit output
•
16 bits signal processing
•
3 frames/second with full resolution in continuous and triggered operation
•
Variable partial scan is available with user-definable height and starting point
•
2X vertical binning mode (AM-1600GE only)
•
Programmable shutter from 3 lines(296 μ s) to 3327 lines (328 ms)
•
Edge Pre-select and Pulse Width Control trigger modes
•
Sequence trigger mode for on-the –fly change of gain, exposure and ROI
•
Built in programmable Look Up Table (LUT) for gamma, 0.45
•
Blemish compensation circuit built in(AM-1600GE only)
•
Shading compensation(pixel non-uniformity compensation)(AM-1600GE only)
•
L/R channel balance
•
AGC(Automatic Gain Control) circuit provided
•
Built-in test pattern generator
•
Exposure time from 1 line(98.66 μ s) to 2 sec.* using Pulse Width trigger mode
•
GPIO in combination with Pulse Width trigger for more precise exposure time
•
One-push and manual Bayer white balance (AB-1600GE only)
•
Programmable GPIO with opto-isolated inputs and outputs
•
Two types of lens mounts available as factory option, Universal P mount or Nikon F
mount
•
Comprehensive software tools and SDK for Windows XP/Vista (32 bit”x86” and 64
bit “x64” JAI SDK Ver. 1.2.1 and after )
* For best image quality, the maximum recommended exposure time is <6 frames (2
seconds), however, depending on your application, significantly longer exposure may
still produce an acceptable signal-to-noise ratio, even without applying any external
cooling.