Setting Items
Description
SYSTEM
Page 2
Default
Restores camera back to factory settings.
Information
Displays model, DSP, MCU and the Module ID (MEID/IMEI) number.
Check our website for the latest firmware version and uploading
instructions.
Model (VZW or ATT)-(MINE or ICE)-4
DSP RL180808
MCU 2018/09/19 (or latest version)
IMEI
(will match the number on the sticker)
Password
The default password is 000000. Choose OFF to stop this function
and ON to set a six digit password.
If you lose the password, you
must send it in to JAGER PRO to reset it.
Beep
The default is ON. Choose OFF to silence key pad when making
selections.
FW Update
Used only when updating the Firmware from the SD card.
Setting Items
Description
SYSTEM
Page 3
LED Indicator
The default is ON. Choose OFF to turn off the Green LED indicator
on the front of the camera.
Debug Switch
Only used when instructed by support personnel.
7
System Menu (Continued):
Wireless Menu:
Setting Items
Description
WIRELESS
Send Mode
Instant: (Recommended) The camera sends a photo immediately
when it takes a photo. Pressing the OK button while Instant is
highlighted will bring up the Max Num field. The Max Num field
indicates the maximum number of photos or texts allowed to be
sent within 24 hours. 0 is infinite (Recommended), 1-999 during a
24 hour period. The camera resets to zero each night at 0000 hours.
Off: Cellular function is de-activated. Photos will not be sent to a
recipient but will be saved to the SD card.
Realtime
The Realtime function must be ON for the camera to receive
commands from the selected recipients.
Register Camera
Pressing OK will start the registration process. You will receive a
confirmation with your IMEI number and registration code. More
information can be found in our Activating Service section, page 8.
Diagnostic
Hello Test: This will verify that your camera is activated, has a signal
and can reach the internet and the Server.
APN Setting: Only used when instructed by support personnel.