JAGER PRO I.C.E Operation Manual Download Page 17

• Avoid using, placing, or storing the equipment in places subject to strong sunlight or high temperatures, such 

as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, 
overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of 
the casing. 

• Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage 

the equipment. 

• The DC Port plug must be removed before accessing camera functions. Opening the camera while the external 

battery is plugged into the housing port may result in damage to both the camera and the external battery.

Desiccant

• When using desiccant, the following precautions should be followed: Keep out of reach of children, do not eat, 

and do not inhale desiccant dust. If the desiccant packet tears or breaks, wash your hands if they come in direct 
contact with the desiccant. Desiccant may cause eye, skin, and mucous membrane irritation. Prolonged 
inhalation may cause lung damage. Asthma can be aggravated by exposure to desiccant. 

• If you know or suspect desiccant has been ingested, seek medical assistance for further treatment, 

observation, and support if necessary. For eye contact, flush with water for at least 15 minutes. For skin contact, 
wash affected area with soap and water. For inhalation of desiccant dust, move affected person into an 
environment with fresh air. For accidental ingestion, drink at least two glasses of water. 

• Check your state/local laws concerning the use of this product.

Internal components

• Removing screws from internal camera ports will damage electronic components and may void the warranty. 

NOTE: There is a warranty seal on your camera; if this seal is broken or tampered with could void your warranty

.

15

Unclaimed Items 

It is the customer’s responsibility to respond to any inquiry initialized from our warranty department. JAGER PRO 

will only keep the returned goods for 6 months. Unclaimed returned item(s) will be discarded after 6 months. If 
the product is beyond the warranty period, the price for repairing or replacing may vary. Please allow 2-8 weeks 
for delivery.

Proof of Purchase or Proof of Warranty

We pride ourselves on providing top-quality scouting cameras for capturing feral swine and take quality 
seriously. We are constantly evolving our designs to ensure our products do the best job possible. When 
requesting warranty coverage, we may require the following: 
a)

Warranty registration within 30 days of the original purchase date, or online at the JAGER PRO website is 
required for warranty coverage to be valid. 

b) We may require proof that the claim is valid. In this regard, we may ask you to, for example, trouble shoot 

service issues via phone, e-mail or other electronic means, return your product to us for warranty coverage 
verification, or provide such other proof to allow us to determine the validity of warranty coverage on your 
claim. This most likely will require you to send your product in to us. 

c)

We may require you to provide us with your purchase receipt as proof of purchase from an authorized 
dealer.

Repair or Replacement

Customer must obtain a Return Merchandise Authorization (RMA) number from JAGER PRO before returning any 
product(s) for repair or replacement. If JAGER PRO concludes that a returned product is not defective, customer 
will be notified, the product will be returned to the customer at their expense and may be charged for 
examination and testing of the product.
This limited warranty is the sole warranty for hardware and software products offered by JAGER PRO and JAGER 
PRO shall not be liable for any amounts for said products except in compliance with this warranty.
If during this period, through normal use, a hardware product becomes defective due to defects in materials or 
workmanship, JAGER PRO will either repair or replace the product. This warranty is void if a product failure 
results from accident, abuse, improper use, disassembly, or unauthorized maintenance and repair by customer. 

Summary of Contents for I.C.E






















Reviews: