INFORMATION STRIP
Below is the information provided by the camera with each photo.
From left to right-
JAGER PRO is the camera manufacturer. The “M” indicates the photo was triggered by
“Motion”. The letter “S” would indicate a photo triggered by SMS code *500# or Request Photo from the portal
or mobile app. “T” would indicate a photo triggered by “Time Lapse” and “E” would indicate a manually triggered
photo using the camera’s OK select button during SETUP or scheduled event set up through the portal or mobile
app.
The date is 07 April 2017. The time is 20:42:46 or 8:42:46 pm. It is a waxing gibbous just before the full moon.
Moon Phases displayed include: (new moon), (waxing crescent), (first quarter), (waxing gibbous), (full moon),
(waning gibbous), (last quarter), and (waning crescent). The temperature is 46 degrees Fahrenheit. The battery
symbol is “P5” which indicates the batteries are fully charged. If it is below P5 (P4
-P0) then it is time to replace
the batteries.
REGISTRATION
The final step is to register your new equipment on the JAGER PRO website via the camera Module ID or Serial
Number so we may provide appropriate firmware updates. These updates are necessary to ensure your
equipment operates efficiently as network wireless technology changes. Multiple cameras and control boxes
may be registered on a single submission.
10
FIRMWARE UPDATES
You should periodically check the JAGER PRO™ web site for firmware updates for your camera. We periodically
release firmware updates with new features and/or performance enhancements. Updating firmware on the
M.I.N.E.™ or I.C.E.™ Series cameras takes a few seconds, and is well worth the effort to ensure your camera is
performing at the highest level possible.
Update the camera firmware if your camera’s firmware is not the latest version:
a. On the portal, select
MY CAMERAS > FIRMWARE UPDATE
.
b. Compare the date of the firmware version listed for your camera to the date of the latest version.
c. If the latest version is more recent than the one on your camera, click
Update
.
d. Take and send another manual photo. After the screen says the photo has been sent, it will indicate that it
is downloading and updating the FW.