CAMERA CHARACTERISTICS
This manual is intended to visually guide users through the individual steps to properly program, operate and
maintain the 4G, Verizon and/or AT&T versions of our JAGER PRO M.I.N.E™ and I.C.E.™ Cameras.
Front View
1. Antenna: (Standard antenna shown) Receives cell tower signals. Our 5 decibel booster antenna is available as
an accessory for operating in low signal areas.
1a. Antenna Seal: Prevents water from getting into the camera through the antenna port.
2. IR LED Illuminator: 44 infrared (Blackout) LEDs that illuminate the target area when camera functions at night.
3. Ambient Light Sensor and Test Indicator: Detects surrounding light to automatically control day and night
camera functions. This sensor emits a green, blinking LED when the selector switch is moved to SETUP. The LED
will stop blinking within 30 seconds after the selector switch is moved from SETUP to ON indicating the camera is
operational and active.
4. Camera Lens: The camera lens has a 52 degree field of view with no magnification. This enables users to
observe a 20 foot field of view measured 15 feet from the lens and a 32 foot field of view when measured 21
feet from the lens.
5. Microphone: Picks up ambient sounds around the camera.
6. PIR Sensor: Passive Infrared motion detector. Senses the presence of a moving object which triggers the
camera to take a photo or record a video.
7. Locking Latch: Secures the camera back battery housing to the main body housing so the rubber seal seated in
the groove in the main body housing meets the front cover creating a waterproof seal.
1
1
2
3
4
5
6
7
1a