49
EN
VERTIGA HYBRID | MANUAL | V_06
7.2. SETTING FANSPEED
1. Put the device in the mode that you want to adjust :
Cooling
/
Heating
2. Put the device in the speed that you want to adjust :
3.
SPEED %
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
4. After 30 seconds, the new settings are automatically saved and the device returns to the selected
mode.
Short press [-] or [+] to adjust the set speed .
The blue LED
flashes quickly as soon as
the minimum speed is reached
.
The red LED
flashes quickly as soon as
the maximum speed is reached.
1
-
1
-
1
-
7.3. FACTORY RESET
1.
Disable power charge .
2.
Press and hold down both the [-] and [+] button on the circuit board
and switch on the power again. The
blue LED
will light up, followed
by the
green LED
2 seconds later and the
red LED
4 seconds late
r
.
Release the buttons as soon as all 3 LEDs are flashing .
3.
The controller will return to the Factory settings, all LEDs will flash for 10 seconds. The controller
will return to the Factory Default settings, all LEDs will flash for 8 seconds .
