Jaga MINI FREESTANDING HYBRID, Installation And Operation Manual

Page: 37 / 40

EN
37 JAGA N.V. | MINI FREESTANDING HYBRID | MANUEL | 2021.06.22 | V.01
6.2. SETTING FANSPEED
1. Select the mode that you want to adjust : Cooling / breeze / Heating
2. Select the speed that you want to adjust :
3. Hold down [
Mode ] and [ - ] simultaneously until the first 4 LED’s are flashing .
5. The device returns to the selected mode. (±30sec).
4. Short press [ - ] or [ + ] to adjust the preset speed .
MODE
15 sec
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
50%
65%
80%
55%
70%
85%
60%
75%
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
90%
105%
120%
95%
110%
100%
115%
6.3. FACTORY RESET
1. Disable power charge .
2. Press and hold down both the [-] and [+] button on the circuit board
and switch on the power again. The
blue LED will light up, followed
by the green LED 2 seconds later and the red LED 4 seconds later.
Release the buttons as soon as all 3 LEDs are flashing .
3. The controller will return to the Factory Default settings, all LEDs will flash for 8 seconds .
-
Default factory setting of the fan speed is selected depending on the device’s length in order to guarantee the sound levels.