Jaga MINI FREESTANDING HYBRID, Installation And Operation Manual

Page: 34 / 40

34 JAGA N.V. | MINI FREESTANDING HYBRID | MANUEL | 2021.06.22 | V.01
4. CONTROL
– Switch on the device : Hold down [ Mode ] for 10 seconds until all LEDs are on.
– Mode : The device is controlled via auto-change-over. The user can temporarily select another
mode manually.
– Permanently off : All functions are disabled until the user switches on the unit via the control pa-
nel. Hold down [ Mode ] until all LEDs are off.
MODE MODE
10 sec
MODE MODE MODE MODE
10 sec
MODE MODE MODE MODE
Tw < 24ºC
Tw > 28ºC
Standby Heating Breeze Cooling
MODE MODE MODE
Snelheid 1 Snelheid 2 Snelheid 3
– Speed : Fan speed is set according to the unit’s length.
Blue LEDs are flashing: the water temperature for cooling is too high
Red LEDs are flashing: the water temperature for heating is too low
4.1. NOTIFICATIONS
MODE MODE
MODE
Check the water temperature sensor Check the room temperature sensor
Control panel error codes
LED flashes rapidly in the color of the set mode .