61
EN
MINI CANAL HYBRID | MANUAL | 13 07 2020, 09:46
7.4. FACTORY RESET
1.
Disable power charge .
1
-
2. Press and hold down both the [-] and [+] button on the circuit board
and switch on the power again.
The blue LED
will light up, followed
by
the green LED
2 seconds later and
the red LED
4 seconds later.
Release the buttons as soon as all 3 LEDs are flashing .
3. The controller will return to the Factory settings, all LEDs will flash
for 10 seconds. The controller will return to the Factory Default
settings, all LEDs will flash for 8 seconds .
7.3. CIRCUIT BOARD ERROR CODE
1
Error sensor [3] - Check the water tempe-
rature sensor
