54
Heat exchanger
Drill the holes and place the plugs.
Use the correct plug for your floor type.
Fix the device to the floor, thanks to the height control in combina-
tion with the rubber sound decouplers. Use the control screws to
adjust the unit to the desired height.
L-profile: in line with the finished floor
Z-profile: on top of the finished floor
If the device is not mounted directly on the floor, the space
under the device must be filled.
Connect the device to the hydraulic system by using the specified
inlet/ outlet connections. Make sure that the connections are air
tight, use a sealant for this. The coil is equipped with a de-aerater.
Secure the height.
07
08
05
06
09
10
Install the device with the coil facing the wall or window.
Mark the drill holes.
