54
7. FACTORY SETTINGS
7.1. FANSPEED
Electronic speed control with 0 ... 10V signal (building management system) :
– min. stand: 50%
– max. stand: 100%
Configuration code - zie hieronder
CONFIGURATION CODE
Max
Min
1
0
10
0-10V input
Ventilatorsnelheid
FANSPEED %
50
55
60
65
70
75
80
85
90
95
100
Factory preset: in %
7.2. FACTORY RESET
1.
Disable power charge .
1
-
2. Ccontroller
3. Press and hold down both the [-] and [+] button on the circuit board
and switch on the power again. The blue LED will light up, followed
by the green LED 2 seconds later and the red LED 4 seconds later.
Release the buttons as soon as all 3 LEDs are flashing
4.
The controller will return to the Factory settings, all LEDs will flash for 10 seconds. The controller
will return to the Factory Default settings, all LEDs will flash for 8 seconds
Attention: 'Reset to Factory Settings' will erase all of the data, settings and applications and
resets the controller to the original factory settings!
Briefly press the [-] or [+] button to adjust the speed of the
fan
1
-
1
-
The blue LED flashes quickly as soon as the
minimum speed is reached
The red LED flashes quickly as soon as the
maximum speed is reached.
