ROUGH-IN DIMENSIONS
2" MIN.
REF. DIM.
3" MAX.
2" MIN.
REF. DIM.
2-7/8" MAX.
1 0 9 6 3 9 A
1 0 9 6 3 9 A
Plumbers' Putty or Caulking
TOOLS REQUIRED
2
HELPFUL HINTS FOR CLEANING AND MAINTENANCE
The solid brass product you have just purchased has been designed to give you years of beauty and service. It is
important to bring to your attention proper care and maintenance procedures, which will ensure its lasting beauty.
First and foremost, it is important (as it is with any fine piece of jewelry or furniture) that the product be wiped clean and
dry with a soft damp cloth after every use.
Second, under no circumstances should an abrasive cleaner or combination cleaner/polish be used on JADO products.
The abrasive nature of such products will eventually destroy the finish and void the warranty.
In the event of stubborn blemishes shown on the finish, we recommend use of Windex window cleaner with a soft cloth,
but we do not recommend it be used on an everyday basis.
It is important to note that it is normal to expect signs of usage over time.
Thank you for selecting JADO for your home.
INSTALL LEVER HANDLE
Place BARREL SLEEVE (1) over VALVE STEM (2) and thread tight onto VALVE (3).
Apply sealant to groove on back side of ESCUTCHEON (4). Slide ESCUTCHEON (4)
onto BARREL SLEEVE (1) flush against finished wall to cover wall opening.
Thread HANDLE SUPPORT (5) onto BARREL SLEEVE (1) until it seats tight against the
internal stop.
Push HANDLE ADAPTER (6) onto VALVE STEM (2) and secure with SCREW (7).
Align KNOB HANDLE (8) as shown or as desired. Install onto HANDLE ADAPTER (6)
and tighten SET SCREW (9) with (2.5 mm) HEX WRENCH (10) supplied to secure handle.
Thread LEVER (11) into KNOB HANDLE (8).
1
2
1
3
4
5
SEALANT
1/2" VALVE
3/4" VALVE
2-3/8" D.
2-3/8" D.
6
7
8
9
10
11
Regular Screwdriver
