ROUGHING-IN
DIMENSIONS
1 0 9 6 5 2 A
1 0 9 6 5 2 A
Phillips Screwdriver
TOOLS REQUIRED
USE MOUNTING POST
AS TEMPLATE
USE MOUNTING POST
AS TEMPLATE
OPTIONAL TO
FINISHED FLOOR
C/L
2
1
2
1
3
3
4
4
1
2
FINISHED WALL
3
014/460 (18")
014/600 (24")
014/800 (30")
Towel Ring
Towel Ring
Spare Tissue Holder
Spare Tissue Holder
Towel Bar
Shelf
Drill
Level
10’
Tape
Measure
Regular Screwdriver
3 / 8 " D .
1 "
5 - 1 / 2 "
5 / 8 " D .
2 - 1 / 2 "
5 - 1 / 2 " D .
1 8 "
2 5 - 5 / 8 "
1 8 "
2 9 - 1 / 2 "
4 - 3 / 4 "
2-1/2"
The wall mounted accessories work best if secured to a wall stud or cross brace within the wall, using the SCREWS (1) supplied.
If the wall mounted accessories are to be installed on a tile or plaster wall the ANCHORS (3) and SCREWS (1) should be used.
Secure MOUNTING POST (2) to wall with SCREWS (1).
For installations on drywall or tiled walls:
Use ANCHOR (3) and SCREW (1) for securing MOUNTING POST (2) to finished wall.
Drill a 1/4" dia. hole a minimum of 1-3/4" deep. Insert the ANCHOR (3) flush with face of the finished wall.
Determine desired height and location (optional) and mark a center line. Using the MOUNTING POST (2) as a template mark the
spot for the ANCHOR (3). If MOUNTING POST (2) is secured to a stud or cross brace drill small pilot hole for SCREW (1).
1
INSTALL WALL BRACKET
2
INSTALL ACCESSORY ( Spare Tissue Holder and Towel Ring)
Install ESCUTCHEON (4) onto WALL MOUNTED ACCESSORY.
Install WALL MOUNTED ACCESSORY with ESCUTCHEON (4) onto installed MOUNTING POST (2). Push WALL MOUNTED ACCESSORY
flush against MOUNTING POST (2) and tighten SET SCREW (5) with HEX WRENCH (6) suppied to secure to wall.
Push ESCUTCHEON (4) against finished wall.
6
5
6
5
OPTIONAL TO
FINISHED FLOOR
OPTIONAL TO
FINISHED FLOOR