(II)
JWL 8
stable
：
Stable print
（
weight is equal or more than 20d
）
key
：
Manual print by pressing key
13.
P12:
Print format
See the appendix (more than 100 formats. The appendix just shows two formats.)
14.
P13:
Filtering setting
Set the filtering level in which the stable indication turns on. The higher the setting, the
slower stabilization time
Options:
1
，
2
，
3
，
4
15.
P14
：
Tare/Zero condition
stable
：
Only after the stable indication appears, Tare/Zero function acts after pressing
down key
TARE
or
ZERO
always
：
Tare/Zero function acts by pressing down key
TARE
or
ZERO
even if it is not
stable
auto:
Press down key
TARE
or
ZERO
even if it is not stable, but Tare/Zero function
acts after stable
16.
P15
：
RTC set
on: Enable RTC function
off: Disable RTC function
RTC setting:
When the window shows
“on”, press
M-/SET
to enter RTC setting and the window shows
the year. Press
/MR
or
TARE/
to choose date and time. Press
M-/SET
to enter
setting. Press
/MR
or
TARE/
to shift key leftward or rightward; Press
+/PRINT/HI
or
HOLD/LO/-
to change the value. Press
M+/SAVE
to return.
17.
P 16:
Zero-Offset function.
ON
display the previous weight when powering on again
OFF
not display the previous weight when powering on again
18.
P17
：
Initialization
Press
M-/SET
then press
M+/SAVE
to initialization and the window display
RESET.
6.Calibration
Note: Before calibration, please set the unit first. The unit used in calibration is the one that
