5-8. Weight-checking
Step Description
Screen display
1
Under
power-on
status,
press and hold down the key
for more than 3
seconds.
2
Press
the
key
to cyclically
shift among Hi (upper limit),
Lo (lower limit) and NC
(Cancel
weight-checking)
parameters.
3
(1) While shifting to Hi or Lo
parameter to be set, press
the key
to
enter into weight-checking
value setting mode, the digit
to be changed will flash on
the screen.
(2) While shifting to NC
parameter, press the key
and the
screen will display the right
figure, and then begin Step 6
(2).
4
Press the key
to cyclically select the digit to
be changed; press the
key
to
cyclically increase the value
of flashing digit to stipulate
the value of upper limit or
lower limit.
5
Press
the
key
6
(1) Redo the step 2 to 5.
Once the weight-checking
value is set, press the key
to return to normal weighing
mode, now the scale is under
weight-checking status.
(2) While shifting to NC
parameter, press the key
PAGE
JADEVER
http:www.jadever.com.tw
22
