V03
JCAII
16
2.If you want to enable the function, press
If you want to disable the function, press
Note:
When the
HI & LO
checking function is enabled, there will be an arrow pointing between
PERSET TARE
and
NET.
8-8 Weight checking
8-8-1Set the high limit of weight checking
1.Press under normal weighing mode. The display of the weight is blinking in the Weight
window while the arrow is pointing at
HI
in the Total Count window. (If not, press )
Eg. 111pieces.
2. Use numeric key to input the high limit of weight you want.
3. Press to save and return.
8-8-2Set the low limit of weight
1. Press under normal weighing mode. The display of the weight is blinking in the Weight
window while the arrow is pointing at
LO
in the Total Count window. (If not, press )
E.g. 111pieces.
2. Use numeric key to input the low limit of weight you want.
3. Press to save and return.
8-8-3Enable / Disable the weight limit function
1. Under normal weighing mode, press or . The display in the Total Count window is
blinking. (If not press )
2. If you want to enable the function, press
If you want to disable the function, press
Note:
When the
HI & LO
checking function is enabled, there will be an arrow pointing between
