Jade Bird JBE-P2L1 Installation & Operation Manual Download Page 2 | Manualshive

Page: 2 / 56

background image

JBE-P2L1 Panel Manual V1.2 EN

Release Date: January 5, 2021

Rev 01

This manual is protected by copyright © 2019 Jade Bird Fire with all rights reserved.
Draco and Lyra 21 Series are trademarks of Jade Bird Fire.

Manufacturer

Jade Bird Fire Alarm International (Europe), S.L.

Carrer de Tarragona 157 7-2,

08014 Barcelona, Spain

REV 01. This document covers control panels with firmware version 1.0.

This product is CE marked and meets the requirements of the following norms and directives:

•

EN 54-2 / UNE 23007-2: Control and indicating equipment for fire detection and fire alarm
systems.

•

EN 54-4 / UNE 23007-4: Power supply equipment for fire detection and fire alarm systems.

•

EN 61000-6-3 Electromagnetic compatibility (Emissions)

•

EN 50130-4 Electromagnetic compatibility (Immunity)

•

EN 62368-1 Safety requirements

•

RoHS Directive 2011/65/EU

Note regarding: 2012/19/EU (WEEE directive): This product cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info.

For additional product and contact information, visit www.jadebird.eu.com.

«
1
2
3
4
...
»

Summary of Contents for JBE-P2L1

























































Reviews:

No comments

Related manuals for JBE-P2L1

Brand: Lawler Pages: 4

Brand: Hama Pages: 46

Brand: Galcon Pages: 35

Brand: Van Air Pages: 4

Brand: Samson Pages: 56

Brand: EasyIO Pages: 17

Brand: D&R ELECTRONICS Pages: 12

Brand: Gardigo Pages: 6

Brand: VAT Pages: 14

Brand: Daihan Scientific Pages: 11

RDS17S-ELITE1-R1

Brand: D&R ELECTRONICS Pages: 12

iDual A E27 iD60

Brand: jedi LIGHTING Pages: 23

Brand: Nice Pages: 32

Brand: A & H Pages: 35

Brand: Cypress Pages: 2

MEMO CORE CONTROL

Brand: MegaLite Pages: 11

Brand: D+H Pages: 36

Brand: netvox Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands