PR-805/810/810
L
User Manual
83
Step 9)
A default virtual COM port will be assigned by the wizard for this communication link.
The COM port address can be attained by clicking on
Configure.
This information will
also be available later after successfully pairing with the PR-8XX.
Step 10)
Click
Finish
.
Step 11)
An informational balloon will appear
Step 12)
Click on the Balloon to allow the PR-8XX to connect to the Remote Host.
Step 13)
A window appears prompting for the Bluetooth PIN Code for the PR-8XX. Enter the serial
number of the instrument as the PIN code and click
OK
.
FIGURE 100 - BLUETOOTH PIN CODE REQUEST.
Step 14)
If successfully paired a serial connector icon will appear in My Bluetooth Places. The PR-
8XX will also indicate a successful pairing and connection by displaying the
icon and
the name of the Remote Host.
Note
: T
he virtual COM port for this connection is also displayed under the serial number of the
PR-8XX.
✓
Wireless communication link has been established between the PR-8XX and the Remote Host.
HyperTerminal or PhotoWin can be launched at this point to communicate with the PR-8XX
wirelessly.
Connecting to PR-8XX after Pairing
After successfully pairing with the PR-8XX there is no need to go through the
Bluetooth Setup Wizard
under
My Bluetooth Place
.
Simply open
My Bluetooth Places
then right click on the serial connector
icon shown below and choose
Connect.
