Jacuzzi sasha mi, Use & Maintenance

Page: 45 / 92

45
Q
Select one of the three programmes and activate it by pressing one of the indicated
keys (once pressed, the key will turn blue):
Warning: perform the following procedure if the Jacuzzi® remote control system has
been installed: press the key of the program selected, wait for it to go dim and press
again within 20 seconds.
- Tepidarium
- Hammam
- Calidarium
Q
After a few minutes, steam will be released from the nozzles.
Q
Every programme can be interrupted at any time by pressing the key relative to the
programme itself.
it is also possible to switch from one programme to another: first deactivate the programme
in progress, wait for the "thermometer" symbol to stop blinking and then choose the desired
programme.
Q
Once the selected programme has been activated, the "thermometer" symbol on the key
panel indicates the cabin temperature: the symbol is divided into three sections that light
up progressively to indicate temperature increases. When the the final stage temperature
lights up, the ideal temperature relative to the selected programme, has been reached.
ATTENTION! The emerging steam has a temperature nearing 100 °C!
Do not rest legs on the steam outlet, keeping them at least 40 cm from the
outlet nozzles (dispenser).
Q
Each programme has a predefined light colour (the shown symbol lights up); specifically
designed to heighten those feelings of well-being and relaxation that Sasha offers.
Refer to the Chapter “Cromodream® for more detailed information.
each programme
lasts approximately
45 minutes