36
www.jacuzzi.com
Using
Your Sauna Control Panel
Using Your Infrared Sauna
Unlike a traditional sauna, infrared heats the body directly.
Air temperature in the sauna is not as important as the type
and quality of the infrared being received. We recommend
the following protocol:
a.
Turn the sauna to allow the heaters to come up to
optimal temperature and for the cabin to warm to a
comfortable temperature.
b.
When you enter the sauna, set the time to the desired
session time and turn the thermostat up to 150+F /
65C. This will keep the heaters are on the entire time
to ensure that you are receiving constant
infrared heat.
c.
Sit back and relax. Enjoy your sauna session.
When connected to the properly grounded power source,
your Jacuzzi® sauna will turn ON to the set temperature and
count -down with a few pushes of the Power button.
System On/Off
1)
Press the “POWER” button once to
turn on the sauna.
2)
Your session will automatically end
after the programmed timer expires.
3)
Press the “POWER” button at any
time turn off the sauna.
Sauna Session Time
You can set the duration of your sauna session
for a maximum of 60 minutes. Press the
TIME UP or TIME DOWN buttons to increase
or decrease your desired sauna session time
in 5 minute increments.
When you have reached your desired time,
release the button.
Controlling the Set Temperature
You can program your sauna for a maximum temperature of 175°F (80°C). Press the TEMP UP/DOWN (+/ -) buttons
to set the desired temperature. When the display shows your desired temperature, release the buttons. Press either
the TEMP UP or TEMP DOWN buttons during your sauna session to manually control the desired cabin temperature.
*See “Instructions For Use” on next page for recommendations.
Jacuzzi
®
Saunas