background image

098-014494-45 Rev.7
06-05-19
TED
JRM 06-28-19
JHB 07-19-19

Step 1:
Insert flex line inlets and tighten by hand. Apply 
plumber’s putty to underside of body and insert into 
mounting hole. With wrench, tighten the locking nut.  

Step 4:
Grab riser assembly and lower the EasyInstall® end-
fitting into faucet body. Press down until the end-fitting 
“pops” in.

Step 2:
Apply plumber’s tape to top of riser threads and 
attach to spring assembly. Tighten with wrench.

Step 3:
Make sure that the EasyInstall® locking washer is 
seated properly inside the faucet body.

Step 5:
Lock the EasyInstall® locking nut in place. Tighten 
with wrench.

P/N:

DATE:

DRAWN:

CHECKED:

APPROVED:

Limited Three Year Warranty

(Commercial Applications)

  T&S warrants to the original purchaser (other than for purposes of resale) that such product is free 
from defects in material and workmanship for a period of three (3) years from the date of purchase.  
During this three-year warranty period, if the product is found to be defective, T&S shall, at its option, 
repair and/or replace it.  To obtain warranty service, products must be returned to.....

 

 

T&S Brass and Bronze Works, Inc.

 

 

Attn: Warranty Repair Department

 

 

2 Saddleback Cove

 

 

Travelers Rest, SC 29690

  Shipping, freight, insurance, and other transportation charges of the product to T&S and the return 
of repaired or replaced product to the purchaser are the responsibility of the purchaser.  Repair and/
or replacement shall be made within a reasonable time after receipt by T&S of the returned product.  
This warranty does not cover items which have received secondary 

fi

 nishing or have been altered 

or modi

fi

 ed after purchase, or for defects caused by physical abuse to or misuse of the product, or 

shipment of the products.
  Any express warranty not provided herein, and any remedy for Breach of Contract which might 
arise, is hereby excluded and disclaimed.  Any implied warranties of merchantability or 

fi

 tness for a 

particular purpose are limited to three years in duration.  Under no circumstance shall T&S be liable 
for loss of use or any special consequential cost, expenses or damages.
  Some states do not allow limitations on how long an implied warranty lasts or the exclusion or 
limitation of incidental or consequential damages, so the above limitations or exclusions may not 
apply to you.  Speci

fi

 c rights under this warranty and other rights vary from state to state.

Attention California Residents:

     WARNING This product can expose you to chemicals including Lead, Chromium

(hexavalent compounds) and Phthalates (DEHP) which are known to the State of California

to cause cancer and birth defects or other reproductive harm.

For more information go to

www.P65Warnings.ca.gov.

PRE-RINSE UNIT

B-0113 Series

(B-0113-B, Pre-Rinse 

Unit w/ Wall Bracket)

Installation and 

Maintenance

Instructions

Reviews: