Spa Light
Two filters, one blue and one red, are provided with your
spa. To change the filter, simply snap the colored filters in
place on top of the normal lens. Two replacement bulbs
(GE Model 912, 12W, 12V) are also included. Put them in
a safe place for future use. When a bulb burns out, replace
it from the back of the light fitting, on the outside of the shell,
by pulling out the bulb receptacle.
Cleaning Your Spa
Your Santina spa shell consists of two layers of plastic
materials. Its smooth top surface of acrylic is tough and
durable and contains concentrated color. This is supported
by a substantial thickness of fiberglass-reinforced polyes-
ter resin. A catalyst causes a chemical reaction during
manufacturing that bonds these layers permanently into a
hard, strong material. With a minimum amount of care and
cleaning, your whirlpool spa will look new for years.
To clean your spa, simply use a mild, non-abrasive liquid
detergent, isopropyl alcohol, or commercially prepared spa
cleaner. Do not use abrasive cleaners. You can protect
and restore the gloss to a dulled surface by applying
Meguiar’s #10 Mirror Glaze, which is a product specifically
designed for use on acrylic finishes. If Meguiar’s is not
available, an acrylic polish of equal quality or automotive
paste wax will do.
Use a spa cleaner for residue buildup at the water level
of the spa surface. This may be applied to the acrylic
surface with a soft cloth and wiped clean. Use sparingly in
small amounts to avoid contaminating the spa water. If
heavily soiled, it may be advisable to lower the water level
2 - 3 inches before cleaning, then refill to normal level.
Covering Your Spa
An optional rigid spa cover is available to place on top of
the spa. The use of this cover will to help reduce energy
costs by minimizing heat loss and evaporation from your
spa. In addition, the attractive spa cover is an effective
means of preventing debris such as leaves and dirt from
entering your spa when not in use. Follow the instructions
for use and care provided with the spa cover.
CAUTION:
While the spa cover is rigid, it is not designed to
support any weight. Therefore, as a safety precaution
and to preserve the life of your cover, you must not sit,
stand, or lie on it; nor should you place objects of any
kind on top of it.
Jacuzzi Whirlpool Bath does not guarantee or war-
ranty this cover. Refer to spa cover manufacturer's
information provided with the cover.
LIGHT BULB
REPLACEMENT
Repairs to the Acrylic
Minor scratches which do not penetrate the color finish
(acrylic) can be removed with 600-grit wet/dry sandpaper.
Restore the glossy finish with Meguiar's #10 Mirror Glaze or
comparable automotive paste wax.
Major scratches or gouges which penetrate the acrylic
surface will require refinishing. Ask your Jacuzzi Whirlpool
Bath Dealer for special instructions.
16
SANTINA SPA WITH RIGID
INSULATING COVER
LIGHT BULB
NORMAL
LENS
COLORED
FILTER
LIGHT
BEZEL
SHELL
BULB
RECEPTACLE
LOCKING
NUT
MAINTENANCE
