03/23/05 J600CHT Assembly – DRAFT Prepared for Jacto
Service Seminar 3/2005
DRAFT COPY
Auxiliary Duct Assembly
1)
Install the two auxiliary ducts onto the movable duct with clamps as shown
below. Next install the hoses that connect to the main duct nozzle and auxiliary duct
nozzles and tighten the hose clamps. Route the two supply hoses through the hose
retainer clips on the duct and tighten. These two hoses should then be routed through
the hose loops on the back of the duct and then threaded into the orange sheath up to
the control valve and the ends installed onto the control valve. The 6 JA nozzles and
swirl cores need to be installed on the auxiliary duct nozzle branches by removing the
nozzle caps and removing the protective disc and inserting the nozzle filter, nozzle
and swirl core.
Retainer Clips
Auxiliary Duct
Nozzle Branches
