03/23/05 J600CHT Assembly – DRAFT Prepared for Jacto
Service Seminar 3/2005
DRAFT COPY
Stationary Duct Assembly
1)
Install the stationary duct on the top of the fan housing. It is recommended the 4
bolts that attach the stationary duct to the frame be installed first to help align the
other 12 holes around the flange of the duct. Please note two of the 4 bolts need to be
installed from the inside of the duct opening to the frame. It may be difficult to align
the remaining holes and in some instances loosening the bolts that hold the fan
housing to the frame may be necessary. The duct flange bolts can usually be threaded
into the holes to help with alignment. You will notice one bolt is inserted into the
flange from the factory due to the fact the horizontal cylinder is already installed and
does not allow this bolt to be removed. The picture below shows the proper
positioning of the stationary duct.
