Jacobsen Ransomes HR 6010, Service Course Manual

Page: 25 / 76

REAR WHEEL TOE-IN
The rear wheels should have 1/8" (3.2mm)
toe-in from the front of the wheel to the back
of the wheel. Adjust as follows:
1. Loosen locknuts N at balljoints near both
rear wheels.
2. Rotate the tie rod O until wheels are
correctly positioned. Adjust both tie rods
an equal amount.
3. Re-tighten locknuts. The tires should then
be 1/8" closer at the front than the rear.
Rear Axle Assembly
Tyre Size - 20 X 10.00 - 8
Tyre Type - Titan Turf Trac (Option, Maxxis Turfmax C-165S Kevlar)
Tyre Pressure - 14-20 psi (1.00-1.37 bar)
Tyre Pressure (Kevlar) - 20-22 psi (1.37-1.5 bar)
Torque Setting - 270 Nm (200 Lbs Ft)
Torque Setting - 75 Nm (55 Lbs Ft)