ADJUSTMENTS 9
47
9.17 FAN BELT ________________________________________________________________
Inspect and adjust new belt after first ten hours of
operation. Adjust every 100 hours thereafter.
1. Adjust alternator pulley so belt
(B)
deflects 9/32 to
11/32 in. (0.7 to 0.9 cm) with a 22 lb. (10 kgf) push at
mid span between pulleys.
2. If tension is incorrect, loosen alternator mounting
bolts (
A
) and adjust alternator until proper belt
tension is achieved. Tighten hardware (
A
).
Figure 9P
9.18 LIFT CYLINDERS __________________________________________________________
1. Fully extend the front cylinder, then check spacing
at the cam roller
(U)
. The dimension should be 7/16
to 9/16 in. (1.11 to 1.42 cm).
2. Loosen nut
(V)
then grip the very end of the cylinder
rod, close to the adjusting nut
(point W)
and turn
until spacing is correct. Tighten nut
(V)
.
3. Loosen nut
(X)
on the rear lift cylinder. Adjust the rod
end
(Y)
until the lift arm
(O)
just touches the stop
bracket when the cylinder is fully retracted.
Figure 9Q
Figure 9R
9.19 SPECIFIC TORQUE REQUIREMENTS _________________________________________
1. Ball joints: 30 - 35 ft. lb., (40.5 - 47.2 N.m).
2. Bedknife shoe: 25 - 37 ft. lb., (34 - 50 N.m).
3. Brake drum and hub to wheel motor: 90 - 100 ft. lb.,
(122 - 135 N.m).
4. Steering wheel nut 25-30 ft. lb., (34-41 N.m).
5. Steering cylinder ball joints (2): 50 - 55 ft. lb., (67.5 -
74.2 N.m).
6. Wheel mounting hardware 65-85 ft. lb., (88 - 115
N.m). Check and retorque daily until torque is
maintained.
A
B
7/16 to 9/16 in.
(1.11 to 1.42 cm)
V
W
U
GKV-8
GKV-9
Stop Bracket
X
Y
O
Summary of Contents for Greens King IV Plus
Page 48: ...9 ADJUSTMENTS 48 7 Engine drain plug 22 ft lb 29 7 N m...
Page 59: ...NOTES 12 59 12 NOTES...
Page 117: ...NOTAS 12 es 59 12 NOTAS...