Jacobsen AR3, Safety, Operation & Maintenance Manual

Page: 10 / 76

en-10
JACOBSEN AR3
SAFETY, OPERATORS & MAINTENANCE MANUAL
4 SPECIFICATIONS
4.4 VIBRATION LEVEL
When the machine was tested for hand/arm vibration
levels. The operator was seated in the normal
operating position with both hands on the steering
mechanism. The engine was running and the cutting
device was rotating with the machine stationary.
The Machinery Safety Directive 98/37/EC
By compliance to:
The Lawnmower Standard EN836:1997
Referenced to hand/Arm: EN1033:1996
Information Supplied for Physical Agents
Directive 2002/44/EC
By reference to:
Hand/Arm Standards: BS EN ISO 5349-1 (2001)
BS EN ISO 5349-2 (2001)
When the machine was tested for Whole Body
vibration levels. The operator was seated in the
normal operating position with both hands on the
steering mechanism. The cutting device was rotating
with the machine driven in a straight line at 6 Km/hr
on a level freshly cut lawn.
The Machinery Safety Directive 98/37/EC
By compliance to:
Whole Body EN1032:2003
Information Supplied for Physical Agents
Directive 2002/44/EC
By reference to:
Whole Body Standards BS EN ISO 2631-1 (1997)
4.5 SLOPES
DO NOT USE ON SLOPES GREATER THAN 15°
The slope 15° was calculated using static stability
measurements according to the requirements of
EN 836:1997
Jacobsen AR3
Series:EK, FZ & GX
Hand / Arm Acceleration
level
Max LH or RH
Accelerations m/s 2
Mean Value of X, Y, Z Aeq
1.69
Jacobsen AR3
Series:EK, FZ & GX
Whole Body Acceleration
level
Max LH or RH Foot
Accelerations m/s
2
Mean Value of X, Y, Z Aeq
0.88
Jacobsen AR3
Series:EK, FZ & GX
Whole Body Acceleration
level
Seat Location
Accelerations m/s
2
Mean Value of X, Y, Z Aeq
0.59