2 SPECIFICATIONS
GB-6
2
SPECIFICATIONS
2.1 PRODUCT IDENTIFICATION _________________________________________________
62281 ............................ 18 in. (457 mm) Greens King 518A
with Honda 4.0 H.P. gasoline
engine and 11 blade reel.
62282 ............................ 22 in. (559 mm) Greens King 522A
with Honda 4.0 H.P. gasoline
engine and 11 blade reel.
62283 ............................ 22 in. (559 mm) Greens King
522TA with Honda 4.0 H.P. gasoline
engine, T handle and 11 blade reel.
62284 ............................ 26 in. (660 mm) Greens King 526A
with Honda 4.0 H.P. gasoline
engine and 11 blade reel.
62285 ............................ 26 in. (660 mm) Greens King 526A
with Honda 4.0 H.P. gasoline
engine and 7 blade reel.
Serial Number .............. An identification plate, like the one
shown, listing the serial number, is
attached to the rear crossmember
of the frame.
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
2.2
ENGINE__________________________________________________________________
Engine.............................. Honda GX-120 K1Q JG2 4-Cycle,
4HP (2.98 kW) at 4000 RPM
Speed .............................. High Idle - 3000 ± 100 RPM
Low Idle - 1700 ± 100 RPM
Fuel .................................. Regular Grade (Unleaded)
Fuel Tank ......................... 0.66 Gallon (2.5 liter)
Use clean, fresh, regular unleaded gasoline, 85 octane
minimum. When using blended fuel, do not use a blend
with more than 10% ethanol.
Under no circumstances should you use a blend with
methanol.
2.3
MOWER _________________________________________________________________
Reel ................................. 7 and 11 blades, hardened high
manganese carbon steel.
Reel Diameter .................. 5 in. (127 mm)
Cutting Width ................... 18-1/4 in. (457 mm), 22 in.
(559 mm), 26 in. (660 mm)
Cutting Frequency:
7 Blade........................0.250 in. (6.3 mm)
11 Blade......................0.169 in. (4.3 mm)
Height of cut..................... 5/64 to 7/16 in. (2 to 11 mm)
Bedknives ........................ Hardened carbon steel
High Profile ................. Yields 5/32 in. (4 mm) cut
(Standard on 62285)
Low Profile.................. Yields 7/64 in. (2.8 mm) cut
(Standard on 62284)
Tournament................. Yields 5/64 in. (2 mm) cut
Super Tounament ....... Yields x/xx in. (x mm) cut
(Standard on 62281, 62282 and
62283)
Reel Clutch ...................... Cog Type
Product
EEC Sound
Power
Vibration M/S
2
Arms
62281
62282
62283
62284
62285
100 dba
7
RACINE, WI
MADE IN U.S.A.
TEXTRON TURF CARE AND SPECIALTY PRODUCTS
62281
1601
