provided, and attach bracket to mount.
See Figure 6.
10. Take the seat belt kit, and the 7/16”
x 2” hex bolts, lock washers, and 7/16”
hex nuts. Locate the holes in the lower
member at the back of the cab near the
bottom of the tubing. Bolt the anchor to
the tubing using the harware provided.
Use Figure 7 as a guide.
NOTE: All references to left and right are taken from the operator’s point of view when he/she is
sitting in the driver’s seat.
Jacobsen 600 Series Mounting Instructions
Figure 7
