51
MDB:
Immediate change (default: disabled)
The amount relative to a selection is
generally cashed after the dispenser has
sent the “Successful selection” signal.
When you enable this function, the
cash signal is sent at the start of the
dispensing cycle.
The setup of this parameter is compulsory.
Decimal point position
To set up the decimal point position, i.e.:
0 - decimal point disabled
1 - XXX.X (one decimal place)
2 - XX.XX (two decimal places)
3 - X.XXX (three decimal places)
Booking time (default: 7 seconds)
To set up how long the dispenser displays
the residual credit necessary to dispense
the selection.
Type of dispensing
To set the operation mode by multiple
or single dispensing. In case of multiple
dispensing, the change is not automatically
given at the end of a successful delivery, but
the credit will remain available for further
dispensing. If you press the coin
return button (if the function is enabled),
the remaining credit will be returned up to
the maximum change value.
Obligation to buy
To enable/disable the operation of the coin
return button before dispensing a product.
• ON: the change is returned after having
selected a product
• OFF: the change is returned just after
having pressed the coin return key (the
dispenser is acting as a coin changer)
Maximum credit
Use this function to define the maximum
accepted credit for inserted coins.
Maximum change
You can set a limit on the total amount of
the change the coin mechanism will pay as
soon as you press the change button or
after one single dispensing.
The credit exceeding the amount you
have programmed by this function will be
cashed.
Accepted coins
To define which coins shall be accepted
among those recognised by the validator
when the change tubes are full.
For the coin/value correspondence check
the coin mechanism configuration.
Returned coins
To define which coins shall be used to give
the change among those available in the
tubes. This parameter is active only with
the coin mechanisms not intended to
manage the choice of the tube in use
automatically (Auto changer payout).
For the coin/value correspondence check
the coin mechanism configuration.
