20
Fig. 5.3 - Pull red release bar
Fig. 5.4 - Insert Rinza cleaning tablets
Note:
Only Milk-Coffee and Choco-Coffee
dispensers require Rinza cleaning
tablets.
1. Enter the flushing program as follows:
• Tap on the cleaning icon, which is
shown on the touch screen, when
flushing is due (fig. 5.2).
• Start the operator mode
by insertion of the operator USB key
OR
by input of the PIN code via the touch
screen, if this function is enabled
(see chapter “Programming”, menu
1.1).
Flushing
Note:
Flush the dispenser at any time by
starting the operator mode.
Follow the instruction on the screen:
2. Open the dispenser door.
3. Pull the red release bar to open the
outlet compartment (fig. 5.3).
4. Insert a Rinza cleaning tablet in each of
the mixing bowls (fig. 5.4).
5. Press the outlet compartment upwards
until you hear a beep.
6. Close the dispenser door.
Fig. 5.2 - Cleaning icon
When to clean the dispenser
Run the cleaning program when the
cleaning icon appears in the display
(fig. 5.2).
If the dispenser is not cleaned and/or
flushed within 24 hours, the drink delivery
will be blocked.
Start the cleaning program to resume
delivery.
