6
3. Put the handset into the base unit, according to the picture shown below. Make
sure that the LED charge indicator on the base unit lights up to show charging is in
progress. The charging icon
also appears on the screen of the handset. While
charging, the bars in the icon scrolls and when the handset is fully charged, all the
bars of the battery will be filled.
OR
important notice
To obtain the best battery performance, keep the handset being charged for
six hours after first time installation.
When the handset is removed from the base, the LED in the base will stay on
for approximately five seconds before it will fade out.
Remove the battery from this product if storing over 30 days.
A.2. setting language
After the initial charging of six hours you can start using your telephone. If you
would like to choose another language than the pre-set English, do as follows:
Press
and press
three times to select
Display
press
press
twice to select
select lang.
Press
press
to select your desired
language:
english, Deutsch, français, italiano, nederlands, español, Dansk, svenska,
türkçe, norsk
and press
.
A.3. replacement of battery
Depending on your usage, it is recommended to change the rechargeable battery
every year to achieve the best performance.
To replace the battery, follow the instructions below:
1. Prepare one rechargeable battery, 3.7V 650mAH Li-ion battery, part number
6000437.
. Gently remove the handset back cover, remove the old battery.
•
•
•
3. Observe polarity marks inside the battery compartment, and insert the rechargeable
battery. It is not possible to connect the battery with wrong polarity.
4. Replace the handset back gently; making sure the orientation of the battery
compartment cover is correct.
B.
DisplAy symBols AnD tHeir inDicAtion
In standby / Idle mode:
symbol indication
01/0
It shows the current date in month/date format.
0:05
It shows the current time in 1 hours format.
Always displays when your handset is on, shows the battery status.
