13
f.
pHone Book
There are 100 phone book memory banks built inside this DECT phone (13 characters
& 4 digits). You may store frequently used numbers into these memory banks.
If more than one handset comes with your product package (refer to information on
the package), the phone book memories are independent among the handsets. The
phone book memory will not be automatically transferred from one handset to the
others.
f.1. to make a new entry
Key Map:
phone book
new entry
<
enter name>
1. Use the alphanumeric buttons ( to 9) to enter a name for the record in the same
manner as you manage alphabet input from your mobile phone. Push
again
to confirm. Press
to delete an incorrect letter.
If you enter a letter and the next letter is on the same button, press
to move
the cursor to the right or wait three seconds for the cursor to move. To switch
between upper and lower case, press
.
. Use the numeric buttons to enter phone number (timed pause can be inserted inside
telephone number after connected to a PABX. Press and hold
until the display
shows P), push
again to save the record. Press
to delete an incorrect
letter.
3. Press
to select a tone type and press
to confirm.
4. Press
to select “Store” or “Back” and press
to confirm.
5. The phonebook entry is now stored. Press
to return to standby model.
f.2. to make a new entry from caller iD memory and redial list
You may copy a number stored in the Caller ID memory and the Redial list to the
Phone Book. (Consult sections of Caller ID and Last Number Redial for more details)
1. When a desired number is shown while you are reviewing caller ID memory or redial
list, push
once. “Save to Phb.” is displayed. Press
. Enter a name using
the keypad and press
to confirm.
If you enter a name that is already stored in the phonebook, you will be prompted
to enter another name.
. The number is displayed. To confirm and save the entry to the phone book, press
to confirm.
3. If necessary, you can edit the number using
to delete any incorrect digits and
enter new ones using the keypad.
4. Press
/
to select a distinctive ring.
5. When finished, push
again to complete.
6. Press
to exit and return to standby mode.
To add/remove area code, please see section
g.3. caller iD number conversion.
f.3. to make a call from the phone Book memory
Key Map:
/
to select number
1. Use the alphanumeric keypad to enter the first letter of a desired name inside the
phone book. First record starting with the entered letter will be shown on the
screen.
. Use
/
to start browsing until desired name is shown.
3. Push
to make the call.
f.4. to delete the phone Book memory
Key Map:
/
to select number
erase entry
yes
1. Use
/
to scroll until the desired name is shown on the screen.
. Push
to confirm or press
to go back to the menu screen without
deleting. You will be asked to confirm permanent deletion of phone book record.
To confirm, push
again and the selected phone book record is deleted and a
long beep will be heard.
f.5. to change the phone Book memory
Key Map:
/
to select number
edit
Numeric keypad
to enter the correct letters
1. Use
/
to scroll until desired name is shown on the screen.
. Push
to confirm.
3. You may use
to delete letters of the name entry and make a correction.