Jackson TempStar HH Installation, Operation And Service Manual Download Page 25

Page: 25 / 92

07610-002-23-32-AC

PROGRAMMING EXHAUST FAN TIMER

INSTALLATION

Apply power (120, 208, or 240 VAC) to the A1 & A2 terminals.

Timer Wiring with Correct Wire Colors

2. Hold down the SET and ADJ buttons for at least three seconds.

3. Repeatedly press the ADJ button until the letter E appears on the left-hand side.

Press the SET button.

Press the ADJ button until the letters M S appear.

Press the SET button.

Press the ADJ button to adjust the first digit to 2.

Press the SET button.

Press the ADJ button to adjust the second digit to 3.

10.

Press the SET button.

11.

Press the ADJ button to adjust the third digit to 0.

12.

Press the SET button.

13.

Press the ADJ button so there is an arrow facing downward.

14.

Press the SET button.

Light Gray

Dark Gray

Yellow

Red

Red/Yellow

Yellow/Black

Summary of Contents for TempStar HH





























































































Search results

Summary of Contents for TempStar HH

Reviews:

Related manuals for TempStar HH

Brands by name

Popular brands

Jackson TempStar HH, Installation, Operation And Service Manual

Search results

Summary of Contents for TempStar HH

Reviews:

Related manuals for TempStar HH

Brands by name

Popular brands