Jackson TempStar HH Technical Manual Download Page 53

Page: 53 / 75

Tempstar HH Series Technical Manual 7610-002-23-32

Issued: 09/14/2007 Revised: N/A

SECTION 5: PARTS SECTION

FALSE PANEL INSTALLATION

1. Remove the rack assembly from the dishmachine.
2. The false panel will mount inside of the dishmachine.
3. Position the panel in the dishmachine on the side to be

closed.

4. Hold the panel against the side of the dishmachine and

push upward.

5. The panel will clip in at the top, inside of the unit.
6. The holes in the false panel will line up with the rack

assembly holes.

7. Re-install the screws for the rack assembly which will

secure the false panel to the unit.

8. Re-assemble the rack track in an “L” shape for a corner

operation.

Bottom of False Panel

Insert this
side first.

False Panel Positioned in unit.

Rack rail removed and reposi-
tioned for a corner operation.

False Panel

05700-002-52-54

Kit, False Panel with

Mounting Hardware

05700-002-52-89

Summary of Contents for TempStar HH












































































Search results

Summary of Contents for TempStar HH

Reviews:

Related manuals for TempStar HH

Brands by name

Popular brands

Jackson TempStar HH, Technical Manual

Search results

Summary of Contents for TempStar HH

Reviews:

Related manuals for TempStar HH

Brands by name

Popular brands