manualshive.com logo in svg

Jackson ECOLAB ES-2000, Installation & Operation Manual

Share
Download
Jackson ECOLAB ES-2000 Installation & Operation Manual Download Page 75

ES-2000 & ES-4000 Series Installation/Operation Manual 7610-011-35-10 

Issued: 10-29-2007  Revised: N/A

SECTION 6: PARTS SECTION

FALSE PANEL INSTALLATION

69

1.  Loosen the rack assembly from the unit.
2.  False panel will mount to the rack; inside the dishmachine.
3.  Position panel in unit on side to be closed.
4.  Hold panel against side of dishmachine and push up.
5.  Panel will clip inside the unit under the edge of the hood.
6.  Holes in false panel willl ine up with rack assembly holes.
7.  Re-install screws for rack assembly which will secure false
panel to unit.
8.  Re-assemble the rack track in an “L” shape for a corner opera-
tion.

Bottom of side panel.

Insert this
side first.

False panel positioned in unit.

Rack rail removed & reposi-
tioned for a corner operation.

False Panel Weldment

Ecolab No.: 96580394 

Mfg. No.: 005700-002-51-66

False Panel Kit with Hardware

Ecolab No.: N/A

Mfg. No.: 005700-003-12-93

Summary of Contents for ECOLAB ES-2000




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands