07610-002-10-23-V
17
FILLING THE
WASH TUB
OPERATING INSTRUCTIONS
OPERATION
1.
For initial fill, close door and depress and hold "OFF/ON/FILL" switch in FILL
position for approximately 8–10 seconds.
2. Open door and verify water level is correct. Water must be between two lines on
drain stopper. After this, water level is controlled by timer preset at the factory.
3.
Verify drain stopper is preventing wash tub water from pouring out excessively.
There might be slight leakage from drain hole. Verify there are no other leaks on
machine before proceeding further.
4. Wash tub must be completely filled before operating wash pump to prevent
damage to components. Once wash tub is filled, machine is ready for operation.