Screwdriver
Use the screwdriver handle to
tighten the cap nuts.
Phillips Bit
Use the Phillips bit for installing the
mounting bracket
Mounting Bracket
Use this bracket to attach to your
junction box to secure your
Floodlight Cam.
Before you begin
Check out all the stuff in the box.
These instructions assume you’re replacing an existing
floodlight and/or have a junction box where Floodlight
Cam can be mounted. If you don’t have a junction box,
then you’ll need to hire an electrician to install one.
Bag o’ Screws
Find the right ones to attach the
mounting bracket to your junction box
without running to the hardware store.
Wire Nuts (3)
Use these to connect Floodlight Cam’s
wires to your existing wires.
Screw Cap Nuts (3)
Use these to secure your Floodlight
Cam to the posts on the mounting
bracket to complete the installation.
Hook
Hang your Floodlight Cam while
connecting the wires.
5
4
Summary of Contents for ring
Page 1: ...Floodlight Cam...
