Floodlight Cam must be installed on a UL listed junction
box. If you don’t have an existing junction box, you’ll
need to hire a licensed electrician to install one. Also be
sure to comply with your local building codes.
Remove your existing
floodlight
A
With power off at the
breaker
, remove your existing
floodlight from the junction
box it’s attached to and
disconnect the wires.
B
If there is a bracket attached
to your junction box, remove
that as well.
Inspect your junction box to
make sure water cannot get
into it.
A
B
15
14
Summary of Contents for ring
Page 1: ...Floodlight Cam...
