background image

 

24 

Jackson Grills Limited Lifetime Warranty 

 

Jackson Grills Inc. warrants the following materials and workmanship to be free of defects 
for as long as you own the grill.  This covers the following components: main stainless steel 
outer  hood,  stainless  steel  cooking  grills,  stainless  steel  outer  pedestal  system,  stainless 
steel  handle,  stainless  steel  burners  and  stainless  steel  cross  lighters.    Subject  to  the 
following  conditions:  During  the  first  5  years  Jackson  Grills  will  replace  or  repair  at  our 
option  the  defective  parts  free  of  charge.    From  6  years  to  lifetime  Jackson  Grills  will 
provide replacement parts at 50% of the current retail price. 
Inner  stainless  hood,  firebox,  flame  diffusers  and  warming  shelf  come  with  a  10-year 
warranty.    During  the  first  5  years  Jackson  Grills  will  replace  or  repair  at  our  option  the 
defective parts free of charge.  From 6 to 10 years Jackson Grills will provide replacement 
parts at 50% of the current retail price. 
Other components: hose and regulator, thermometer, gas valves, knobs, fasteners, igniter 
and electrode, and all accessories will be provided free of charge during the two years of 
the limited warranty. 

 

Limited Warranty subject to the following conditions and limitations: 

 

-

 

This  factory  warranty  is  non  transferable  and  may  not  be  extended  whatsoever  by  any  of  our 
representatives. 

-

 

Jackson Grills Inc. warrants its products to the original purchaser only (NO EXCEPTIONS) 

-

 

This  Limited Warranty  does  not  cover  any  damage  caused  by  misuse,  lack  of  maintenance,  hostile 
environments, accident, alterations, abuse or neglect, and parts installed by other manufacturers will 
nullify the warranty. 

-

 

This  Limited  Warranty  does  not  cover  and  scratches,  dents,  corrosion,  or  discoloring  by  heat  (all 
stainless steel will discolor), abrasive and chemical cleaners will also damage grill and grill surface. 

-

 

Should  deterioration  occur  to  the  point  of  non-performance  within  the  duration  of  the  warranted 
coverage, a replacement will be provided in the first year only.  This warranty extends to the repair or 
replacement  of  warranted  parts  that  are  defective  in  materials  or  workmanship  provided  that  the 
product  has  been  operated  in  accordance  with  the  operation  instructions  and  under  normal 
conditions. 

-

 

After the first year Jackson Grills Inc. reserves the right to fully disengage all obligations with respect 
to  this  Limited  Warranty  by  refunding  the  original  warranted  purchaser  the  original  wholesale 
purchase price of the warranted parts. 

-

 

A licensed, authorized, service technician or contractor must install the gas grill.  Installation must be 
done in accordance with the installation instructions included with the product. 

-

 

Jackson Grills Inc. or its parties will not be responsible for the installation, labor or any other costs or 
expenses related to the re installation of the warranted part, and such expenses are not covered by 
this warranty. 

-

 

Notwithstanding  any  provision  contained  in  this  Limited  Warranty,  Jackson  Grills  Inc.  responsibility 
under  this  warranty  is  defined  as  above  and  it  shall  not  in  any  event  extend  to  any  incidental, 
consequential, or indirect damages. 

-

 

Jackson Grills Inc. neither assumes, nor authorizes any third party to assume, on its behalf, any other 
liabilities with respect to the sale of this product. 

-

 

The bill of sale and proof of original ownership and serial number will be required when making any 
warranty claims from your authorized dealer.  The warranty registration card must be returned within 
30 days to register your warranty. 

-

 

Jackson Grills Inc. reserves the right to inspect any parts prior to approving warranty claim. 

-

 

Jackson Grills or its representatives shall not be liable for ANY transportation charges, labor charges 
or duties.

 

Summary of Contents for Premier JPG700 series


























Reviews: