17
REAR BURNER.
1
Using a # 2 Phillips screwdriver undo the 4 screws that hold the back cover plate to the inner
hood.
2
Once the cover has been removed use a 7 mm wrench to remove the rear burner orifice from the
rear burner.
3
Install the new rear burner orifice using an approved thread sealant.
4
Reinstall the rear burner cover plate using the 4 screw previously removed.
NOTE:
There is NO air adjustment required when converting the rear burner from propane gas to natural gas.
Remove the 4 screws that hold the back
cover plate using a # 2 Phillips screwdriver
Undo the rear burner orifice using a
7 mm wrench.
Reinstall the new natural gas orifice
using an approved thread sealant.
