background image

 

 

21 

 

Limited Lifetime Warranty 

MODEL NO.: JLS400 (LUX SERIES 2 BURNER) 

 

 

Jackson Grills Inc. warrants the following materials and workmanship to be free of defects 
for  as  long  as  you  own  the  grill.    This  covers  the  following  components:  main  stainless 
steel  outer  hood,  outer  pedestal  system,  stainless  steel  handle,  stainless  steel  burners, 
inner  hood,  firebox,  flame  diffusers,  stainless  steel  cooking  grills,  and  warming  shelf, 
subject  to  the  following  conditions:  During  the  first  5  years  Jackson  Grills  will  replace  or 
repair  at  our  option  the  defective  parts  free  of  charge.    From  6  years  to  lifetime  Jackson 
Grills will provide replacement parts at 50% of the current retail price. 
Other  components: hose and regulator, thermometer, gas valves, knobs,  fasteners, igniter 
and electrode, and all accessories will be provided free of charge during the two years of the 
limited warranty. 

 

Limited Warranty subject to the following conditions and limitations: 

 

-

 

This factory warranty is non transferable and may not be extended whatsoever by any of our 
representatives. 

-

 

Jackson Grills Inc. warrants its products to the original purchaser only (NO EXCEPTIONS) 

-

 

This Limited  Warranty  does  not  cover  any  damage  caused  by  misuse,  lack  of  maintenance, 
hostile  environments,  accident,  alterations,  abuse  or  neglect,  and  parts  installed  by  other 
manufacturers will nullify the warranty. 

-

 

This Limited Warranty does not cover and scratches, dents, corrosion, or discoloring by heat 
(all  stainless  steel  will  discolor),  abrasive  and  chemical  cleaners  will  also  damage  grill  and 
grill surface. 

-

 

Should  deterioration  occur  to  the  point  of  non-performance  within  the  duration  of  the 
warranted  coverage,  a  replacement  will  be  provided  in  the  first  year  only.    This  warranty 
extends  to  the  repair  or  replacement  of  warranted  parts  that  are  defective  in  materials  or 
workmanship provided that the product has been operated in accordance with the operation 
instructions and under normal conditions. 

-

 

After the first year Jackson Grills Inc. reserves the right to fully disengage all obligations with 
respect  to  this  Limited  Warranty  by  refunding  the  original  warranted  purchaser  the  original 
wholesale purchase price of the warranted parts. 

-

 

A licensed, authorized, service technician or contractor must install the gas grill.    Installation 
must be done in accordance with the installation instructions included with the product. 

-

 

Jackson Grills Inc. or its parties will not be responsible for the installation, labor or any other 
costs or expenses related to the re installation of the warranted part, and such expenses are 
not covered by this warranty. 

-

 

Notwithstanding  any  provision  contained  in  this  Limited  Warranty,  Jackson  Grills  Inc. 
responsibility under this warranty is defined as above and it shall not in any event extend to 
any incidental, consequential, or indirect damages. 

-

 

Jackson Grills Inc. neither assumes, nor authorizes any third party to assume, on its behalf, 
any other liabilities with respect to the sale of this product. 

-

 

The  bill  of  sale  and  proof  of  original  ownership  and  serial  number  will  be  required  when 
making  any  warranty  claims  from  your  authorized  dealer.    The  warranty  registration  card 
must be returned within 30 days to register your warranty. 

-

 

Jackson Grills Inc. reserves the right to inspect any parts prior to approving warranty claim. 

-

 

Jackson Grills or its representatives shall not be liable for ANY transportation charges, labor 
charges or duties.   

 

Summary of Contents for JLS-LP






















Reviews: