5
or the US Department of Transport
(DOT) for use in the USA.
2.
The LP gas cylinder used for this
appliance must not have a capacity
larger than 20 lb. (9 kg):
approximately 18” (46cm) high & 12”
(30cm) diameter.
3.
All LP gas cylinders used with this
appliance should be inspected at every
filling and re-qualified by a licensed
service outlet at the expiry date (10
years) in accordance with DOT (USA)
and CTC (Canada) codes for LP gas
cylinders.
4.
All LP gas cylinders used with the
appliance must be provided with a
shut off valve terminating in a cylinder
valve outlet No. 510, specified in the
Standard for Compressed Gas Cylinder
Valve Outlet and Inlet Connections
(USA) ANSI / CGA-V-11977 (Canada)
CSA B96.
The cylinder supply system must be
arranged for vapor withdrawal. The
cylinder must also include a collar to
protect the cylinder valve. As well, the
cylinder valve must include a safety relief
device having direct communication with
the vapor space of the cylinder.
H
ANDLING
1.
Government regulations prohibit
shipping full LP gas cylinders. You
must take your new cylinder to an LP
gas dealer for filling.
2.
A filled LP gas cylinder is under very
high pressure. Always handle with
care and transport in the
upright
position. Protect the valve from
accidental damage.
3.
Do not tip the LP gas cylinder while
connecting it to the regulator. Fasten
the cylinder securely during transport,
use and storage.
4.
If the cylinder is tipped after it is
connected to the regulator, shut off
the gas, disconnect the regulator and
have it checked before using it again.
S
TORAGE
1.
Store the LP gas cylinders outdoors in
a well-ventilated area.
2.
Do not store the LP gas cylinders in
direct sunlight or near a source of heat
or combustion.
3.
If you intend to store your grill
indoors, disconnect and remove the LP
gas cylinder first. Disconnected
cylinders must have plugs installed
and must not be stored in a building,
garage or any other enclosed area.
4.
Keep out of reach of small children.
5.
When the LP gas cylinder is connected
to the gas grill, the LP gas cylinder
must be stored outside in a well-
ventilated area.
6.
Keep the ventilation openings for the
LP cylinder enclosure free and clear of
debris.
