8
Please ensure the proper tools are used for ease of installation.
Please remove all components from the packaging and inspect all components to ensure there is no
damage to any components in the packaging. Please remove all packaging from all components of the
gas grill before operating.
Tool Required for Assembly:
1. #2 Phillips screwdriver.
Side Shelf Installation:
1. Carefully remove the side shelves from the packaging.
2. Each side shelf is secured in place using 7 Phillips screws. DO NOT tighten screws until all 7 are
installed and the side shelf is lined up correctly.
Rotisserie Kit Installation (IF PURCHASED):
1. Carefully remove the rotisserie kit parts from the packaging.
2. Install the motor mounting bracket supplied to the left hand side of the inner hood.
3. Install the motor on the motor bracket.
4. Place the forks and counter balance on the rotisserie rod in the desired location.
5. Place the rotisserie rod into the motor. Slide the rotisserie rod bushing over the opposite end of the
rod and drop into the cut out provided in the inner hood side. Tighten the thumb-screw provided with
the rotisserie rod bushing.
6. When in use, spin the rod with your desired food until the weight of the food is at the bottom. Install
the counter balance straight up to effectively balance the rotisserie system.
Flame Diffusers, Cooking Grids Installation:
1. Remove the flame diffusers form the packaging. Please ensure that all protective plastic has been
ASSEMBLY INSTRUCTIONS
