background image

 

 

10 

1.  Make sure tank valve is in its full off position (turn clockwise to stop). 
2.  Check tank valve to assure it has proper external male threads (type I connection per ANSIZ21.81). 
3.  Make sure all burner knobs are in their off position. 
4.  Remove the protective cap from L.P. tank valve, Always use cap and strap supplied with valve. 
5. 

Inspect valve connection port and regulator assembly. Look for any damage or debris. Remove any 
debris.  Inspect  hose  for  damage.  Never  attempt  to  use  damaged  or  plugged  equipment.  Contact 
your local L.P. gas dealer for repair. 

6. 

When connecting the regulator assembly to the valve, hand tighten nut clockwise to a positive stop. 
Do not use a wrench to tighten. Use of a wrench may damage quick coupling nut and result in a 
hazardous condition. (as the figure shown below)   

7. 

Open tank valve fully (counterclockwise). Use a soapy water solution to check all connections for 
leaks before attempting to light grill. If a leak is found, turn tank valve off and do not use grill until a 
local L.P. gas dealer can make repairs. 

OPD HAND WHEEL

OPE

N

g

CLOS

E

 

 

!!!

WARNING

!!!

 

 

1.  Never insert any foreign objects into the valve outlet. It may damage the valve and 

cause  leaks.    Leaking  gas  may  result  in  fire,  explosion,  heavy  bodily  injury,  or 
even death. 

2.  Do not connect this grill to the self-contained 

L.P.

 gas system of a motor home or 

camper trailer. 

3.  Do not use the grill until leak tested. 
4.  Stop and call the fire department if any leaks are detected. 
5.  If  you  cannot  stop  a  gas  leak,  close  the  L.P.  tank  valve  IMMEDIATELY,  call  L.P. 

supplier or the fire department. 

 

 

!!!

DANGER

!!!

 

 

1.  NEVER store a spare L.P. tank under or near grill or in an enclosed area. 
2.  NEVER  fill  the  tank  beyond  80%  full.  An  overfilled  spare  L.P.  tank  is  dangerous 

because surplus gas may leak from safety relief valve. The safety relief valve on a 
L.P. tank could activate to release gas and cause a fire. 

3.  The spare L.P. tank must have safety caps installed on the L.P. tank outlet. 
4.  If any gas leaks are found on the spare L.P. tank, immediately go away from it and 

call the fire department. 

 

 

 
 
 
 
 
 

Summary of Contents for Encore JENC-LP






















Reviews: