Jäckie ProTIG 500 DC, Operating Manual

Page: 26 / 48

ProTIG 500 AC/DC
Operating Manual Page 23
17. Technical data
Power source
ProTIG 500 DC ProTIG 500 AC
Supply voltage, 50/60 Hz 350V to 480V, 3 Phases 350V to 480V, 3 Phases
Mains fuse 32A 32A
Max. power draw 26 kVA, Imax = 40A, Ieff = 26A 28 kVA, Imax = 41A, Ieff = 26A
Kind of current DC AC
TIG Electrode TIG Electrode
Set-point range Stepless 5- 500A 15- 400A 5- 500A 15- 400A
Operating voltage 10- 30V 20 - 36V 10- 30V 20 - 36V
Open circuit voltage
<13 V (reduced)
(max. 70V) <13 V (reduced)
(max. 70V) <13 V (reduced)
(max. 95V) <13 V (reduced)
(max. 70V)
Duty cycle 40 % (40°C) 500A/ 30V 400A/ 36V 500A/ 30V 400A/ 36V
Duty cycle 60 % (40°C) 440A/ 27,6V 360A/ 34,4V 440A/ 27,6V 360A/ 34,4V
Duty cycle 100 % (40°C) 380A/ 25,2V 300A/ 32V 380A/ 25,2V 300A/ 32V
System of protection IP 23 IP 23
Insulation class F F
System of cooling F F
Weight power source solo 43 kg 48 kg
Weight FG10/KG10 solo 62 kg 62 kg
Weight complete 105 kg 110 kg
Dimensions L x B x H (mm)
complete
1030 x 540 x 1000 1030 x 540 x 1000
Authorised for welding under
increased electrical hazard
Manufactured in accordance with
European Standards EN 60 974-1 and EN 60 974-10
Cooling unit KG 10
Supply voltage, 50/60 Hz 400V, 1 Phase
Mains fuse 16A
Max. power draw 300 VA
Power pump maximum 9l/min, 3,2 bar
Cooling power 1,1kW
System of protection IP 23
Tank 8,5l
Manufactured in accordance with EN60974-2
Generator operation:
The generator must have 30% more power as the welding unit.
Example: 26kVA (unit) + 30% = 34kVA. The generator for this unit must have 34kVA.
A generator with less power will damage the Jäckle welding unit as well as the generator himself
and is disallowed.