Jack QB/T2380-2013, Instruction Manual

Page: 11 / 61

1 / 15
电脑款厚料机系列电控使用说明书
Computerized heavy duty machine electric control box manual
安全事项
·
在使用本产品之前，请先阅读《产品说明书》及所搭配的缝纫机机械说明书。
·
本产品必须由接受过专业培训的人员来安装或操作。
·
请尽量远离电弧焊接设备，以免产生的电磁波干扰本控制器而发生误动作。
·
请不要在室温
45°
以上或者
0°
以下的场所使用。
·
请不要在湿度
30%
以下或者
95%
以上或者有露水和酸雾的场所使用。
·
安装控制箱及其他部件时，请先关闭电源并拔掉电源插头。
·
为防止干扰或漏电事故，请做好接地工程，电源线的接地线必须牢固的与大地有效连接。
·
所有维修用的零部件，须由本公司提供或认可，方可使用。
·
在进行任何保养维修动作前，必须关闭电源并拔掉电源插头。控制箱里有高压危险，必须关闭电源五分
钟后方可打开控制箱。
·
Safety Precautions
·
Before using this product, please read the User's Guide and the manual of the machine attached with it.
·
This product must be installed or operated by professionally trained personnel.
·
Please keep away from the arc welding equipment to avoid the electromagnetic wave from interfering with the
controller.
·
Please do not use it at room temperature above 45°or below 0°
。
·
Please do not use it in places with humidity below 30% or above 95% or where there is dew and acid mist.
·
When installing the control box and other parts, turn off the power and unplug the power plug.
·
To prevent interference or electric leakage accidents, make a good grounding work. The grounding wire of the
power cord must be firmly connected to the earth.
·
All parts for maintenance must be supplied or approved by the Company before they can be used.
·
The power must be turned off and the plug unplugged before any maintenance action is performed.There is a
high-voltage danger in the control box. You must shut down the power for 5 minutes before opening the control
box.
1
产品安装
Product Installation
1.1
产品规格
product specification
电源电压
Voltage
AC
220±20% V
电源频率
Supply frequency
50Hz/60Hz
最大输出功率
maximum output
power
750W
1.2
接口插头的连接
The connection of interface plug
将脚踏板及机头的各连接插头安插到控制器后面对应的插座上，各插座名称如图
1-2-2
所示。连接
好，请检查插头是否插牢。
Insert the connecting plugs of the foot pedal and the head of the machine into the corresponding socket at the back of the
controller. Each socket names are shown in figure 1-2-2.Please check whether the plug is inserted.