CONFIDENTIAL
PROJECT NAME
| date
项目名称
|
日期
26
Operation Instruction
–technical parameter
Electro
nic
thread
slack
210 0
0／1／2／3
／4／5／6
thread slack electromagnet timing selection:
0：[LS] After set angle then make thread slack movement , until upper
needle position delay again [T2] to the setting time
1：[LS] After set angle then make thread slack movement ,until [LE] set
angle.
2：[LS] After set angle then make thread slack movement , delay [T2] to
setting time 。
3:After down needle position signal delay [T1] setting time to slack
thread , until delay to [T2] setting time.
4:After upper needle position signal delay [T1] setting time to slack
thread , until delay to [T2] setting time
5:After down needle position signal start to thread slack until up needle
position stop, then delay [T1] setting time then make [T2] setting thread
slack time
6:[LS] After set angle then make thread slack movement , until upper need
stop. Then delay [T1] setting time then make [T2] setting thread slack time
P+ power
button
211 35
5-359 thread slack electromagnet starting angle LS（relative to down needle angle）
212 300 10-359
thread slack electromagnet ending angle LE（relative to down needle angle，
bigger than LS）
213 1
1-999 thread slack electromagnet starting delay time T1（ms）
214 10 1～999 thread slack electromagnet upper needle position delay time T2（ms）
265 5
0～30 0：forbid to output 5: thread slack electromagnet
