Assembly/Main Unit
7
STEP
2
:
Place receptacle on the base, with
juicer spout facing the same direction
as locking bar. Settle receptacle
into alignment.
STEP
1
:
WARNING:
Never plug the
power cord into an electrical outlet
before unit is fully assembled
.
Place base on a dry flat surface with
locking bar in down position on
the spout side in front of the
machine (as shown).
STEP
3
:
Place filter inside receptacle,
matching the opening on its
bottom to the screw peg
connected to the base.
Note:
Refer to page
6 for all part names.
POWER JUICER
ELITE
Parts/Main Unit
MAIN UNIT
(Fully Assembled)
Assembly
Main Unit
